Following these comprehensive guidelines ensures the professional construction and installation of thin-wall stainless steel tube, guaranteeing longevity, durability, and optimal performance in diverse applications.

Carbon Steel vs Stainless Steel: from density and strength to hardness and machinability, learn how these materials differ and which suits your needs best.

Stainless steel is revered for its corrosion resistance, making it a cornerstone material for critical pipe applications. However, subpar welding practices can compromise this inherent resistance. This article explains 5 tips for welding stainless steel pipes.

Surface pores are a common defect of stainless steel pipes, especially in small-sized 150mm sections.

If there is rust or dirt on the inner surface of stainless steel pipe fittings, you can first use a round steel wire brush and cloth strips tied to thick iron wire or thin steel management rope, then penetrate the pipe and pull it back and forth.

The Russian capital, Moscow, welcomed over 200 foreign exhibitors from 32 countries to participate in the Metal-Expo 2007 industrial exhibition.

The first is the material defect of 304 stainless steel welded pipe during production. Many materials will deform after heating, and some materials will also deform under high pressure. During the use of this product, it will also be deformed due to various reasons.

Stainless steel pipe is a high-strength, corrosion-resistant steel pipe mainly composed of chromium, nickel, carbon and other elements. Stainless steel pipes can be divided into many types. According to different uses and performance characteristics, the common classification methods of stainless steel pipes are as follows:

There are many surface treatment processes for stainless steel pipes. Depending on the use requirements of the pipe, there are many different surface treatment processes such as wire drawing, frosting, and sandblasting.

Stainless steel pipes are hollow oblong steel materials that are widely used in industrial transportation pipelines and mechanical structural parts such as petroleum, chemical industry, medical treatment, food, light industry, mechanical instrumentation, etc. In addition, it has the same bending and torsional strength and is light in weight, so it is also widely used in manufacturing mechanical parts and engineering structures.

Stainless steel round tubes and square tubes are the most common in life. Whether it is national standard or non-standard parts, the amount of stainless steel in these two shapes is almost the same. There is still a difference between round stainless steel pipes and square pipes, not just in cross section.

Stainless steel oval tubes are very common in the bathroom, furniture, and electronic and electrical industries because of their good resistance to chloride corrosion, rust resistance, and pressure resistance. In the sanitary ware industry, flat pipes are used, with wall thickness generally between 0.7mm and 1.0mm, and pipe diameters between 38mm and 63mm. In the furniture industry, they are mainly used as table legs and chair legs. The wall thickness is generally between 1.0~1.2mm, or the wooden legs are covered with a layer of stainless steel pipe for protection. The wall thickness is generally 0.8 or 0.9mm, and the pipe diameter is 12mm. -42mm