Advantages of stainless steel application heating tubes and possible causes of fires

One of the stainless steel applications is the stainless steel heating tube, which directly heats the fluid through forced convection. A pump is used to pump the fluid into the heating chamber on one side of the stainless steel heater. After being heated, it flows out on the other side of the heater. This process of forced circulation by the pump has the advantages of obvious energy saving, convenient application and economy compared with the traditional heating process. benefit.
The product features of stainless steel heating tubes are first of all, small size but high power. The product mainly uses clustered tubular heating elements. Each clustered tubular electric heating element has a maximum power of up to 5000KW. Secondly, the thermal response is fast, the temperature control accuracy is high, and the overall thermal efficiency is high. The third point is that it has a wide range of uses and strong adaptability. It can be used in both explosion-proof and ordinary situations. Its explosion-proof level is as high as Class B and C, and its pressure resistance reaches 20Mpa. It can also be used vertically according to user needs. Or horizontal installation. The fourth point is that the heating temperature is relatively high, and the maximum operating temperature is as high as 850°C, which is much higher than the operating temperature of ordinary heaters.
In addition, this type of product can achieve fully automated control. Through the heater circuit design, it can easily control parameters such as outlet temperature, pressure, flow rate, etc., and can also be connected to a computer to achieve more functions. And it has long service life and high stability performance.
The stainless steel application heating tube is filled with high-temperature magnesium oxide powder for insulation treatment during production and processing. Therefore, its surface is insulated and not electrified when it is powered and heated, and it is very safe in application. In addition, the electric heating tube has a high degree of mechanization, can be bent into various shapes according to requirements, is lightweight, and is easy to disassemble and assemble. The electric heating tube has a simple structure, uses less materials, is cheap, has a long service life, has a high heat conversion rate, and saves energy.
However, it should be noted that because the power of stainless steel heating tubes is relatively high, sometimes it is very easy to cause fires if used improperly.
There are several main reasons why stainless steel application heating pipes are prone to fires.
One is that when baked at high temperature for a long time, it is easy to ignite flammable objects placed on the stainless steel heating tube or flammable objects nearby the tube; the other is to insert the electric heating wire without a plug into the socket. It can also cause short circuits in wires and cause fires; thirdly, when the electric heating wire is aged and damaged, it must be replaced in time, otherwise it will easily cause a fire; fourthly, when the operator leaves the work site for a long time, the stainless steel heating wire is not unplugged. The finished plug of the tube will cause the temperature to continue to rise and cause a fire; also, when there is a power outage, unplug the plug immediately to avoid forgetting it and causing a fire afterwards; do not use electric heating wires that have been repaired many times, which is easy This can lead to overloading of lines and a fire.