Stainless steel pipe inspection considerations

The procedure for inspecting the pipe at the time of receiving is generally:

Before unloading, the first appearance of the inspection. Such as stainless steel pipe packaging is intact without damage; in the unloading, once again cosmetic inspection to confirm that in transit, stainless steel pipe whether suffered accidental damage.

Stainless steel pipe in unloading, transportation or stacking of each link may be mishandled, resulting in stainless steel pipe damage or dent. The external surface of each pipe should generally be inspected to check whether damage has occurred.

Stainless steel pipe agents or engineers should check the number of stainless steel pipes in accordance with the bill of lading to avoid missing or incorrect quantities shipped.

Stainless steel pipes found to have traces of damage should be stored separately from other pipes and should not be handled without authorization.

The above is the stainless steel pipe in the inspection process should pay attention to matters, the following editorial to share with you stainless steel pipe in the transportation and storage should pay attention to matters.

Stainless steel pipe should have a special storage rack, the storage rack should be wooden or painted surface of carbon steel bracket or pad to rubber mat, in order to isolate from other metal materials such as carbon steel. When stored, the storage location should be convenient for lifting, relatively isolated from other materials storage area, there should be protective measures to avoid dust, oil, rust on the stainless steel pollution.

Stainless steel pipe lifting, should use special lifting gear, such as slings, etc., prohibited the use of steel wire rope in order to avoid scratching the surface; and in the lifting and placing, should avoid the impact of bumping caused by scratching.

Stainless steel pipe in the transportation, the application of transport tools (such as trolleys, battery trucks, etc.), and should be clean with isolation measures to prevent dust, oil, rust contamination of stainless steel. Dragging is strictly prohibited to avoid bumping and scratching.